Machine learning and 3D bioprinting
DOI:
https://doi.org/10.18063/ijb.717Keywords:
Bioprinting, Machine learning, Deep learning, Biomaterials, Bioprinted constructsAbstract
With the growing number of biomaterials and printing technologies, bioprinting has brought about tremendous potential to fabricate biomimetic architectures or living tissue constructs. To make bioprinting and bioprinted constructs more powerful, machine learning (ML) is introduced to optimize the relevant processes, applied materials, and mechanical/biological performances. The objectives of this work were to collate, analyze, categorize, and summarize published articles and papers pertaining to ML applications in bioprinting and their impact on bioprinted constructs, as well as the directions of potential development. From the available references, both traditional ML and deep learning (DL) have been applied to optimize the printing process, structural parameters, material properties, and biological/ mechanical performance of bioprinted constructs. The former uses features extracted from image or numerical data as inputs in prediction model building, and the latter uses the image directly for segmentation or classification model building. All of these studies present advanced bioprinting with a stable and reliable printing process, desirable fiber/droplet diameter, and precise layer stacking, and also enhance the bioprinted constructs with better design and cell performance. The current challenges and outlooks in developing process–material–performance models are highlighted, which may pave the way for revolutionizing bioprinting technologies and bioprinted construct design.
References
Gudapati H, Dey M, Ozbolat I, 2016, A comprehensive review on droplet-based bioprinting: Past, present and future. Biomaterials, 102:20–42. https://doi.org/10.1016/j.biomaterials.2016.06.012
Placone JK, Engler AJ, 2018, Recent advances in extrusion‐based 3D printing for biomedical applications. Adv Healthc Mater, 7(8):1701161. https://doi.org/10.1002/adhm.201701161
Papaioannou TG, Manolesou D, Dimakakos E, et al., 2019, 3D bioprinting methods and techniques: Applications on artificial blood vessel fabrication. Acta Cardiol Sinica, 35(3):284. https://doi.org/10.6515/ACS.201905_35(3).20181115A
He J, Zhang B, Li Z, et al., 2020, High-resolution electrohydrodynamic bioprinting: A new biofabrication strategy for biomimetic micro/nanoscale architectures and living tissue constructs. Biofabrication, 12(4):042002. https://doi.org/10.1088/1758-5090/aba1fa
Ng WL, Chan A, Ong YS, et al., 2020, Deep learning for fabrication and maturation of 3D bioprinted tissues and organs. Virtual Phys Prototyp, 15(3):340–358. https://doi.org/10.1080/17452759.2020.1771741
Regenhu, 2022, The R-GEN 100 bioprinter [EB/OL]. https://www.regenhu.com/3dbioprinting-solutions/r-gen- 100-3dbioprinter (Accessed November 8, 2022)
3dsman, 2022, EnvisionTEC: 3D-Bioplotter [EB/OL]. https://3dsman.com/envisiontec-3d-bioplotter (Accessed November 8, 2022)
Ozbolat IT, Hospodiuk M, 2016, Current advances and future perspectives in extrusion-based bioprinting. Biomaterials, 76:321–343. https://doi.org/10.1016/j.biomaterials.2015.10.076
Ning L, Chen X, 2017, A brief review of extrusion‐based tissue scaffold bio‐printing. Biotechnol J, 12(8):1600671. https://doi.org/10.1002/biot.201600671
Brown TD, Dalton PD, Hutmacher DW, 2011, Direct writing by way of melt electrospinning. Adv Mater, 23(47):5651– 5657. https://doi.org/10.1002/adma.201103482
Wu Y, Fuh J, Wong Y, et al., 2015, Fabrication of 3D scaffolds via E-jet printing for tendon tissue repair, in International Manufacturing Science and Engineering Conference, 56833, V002T03A005.
Zhang B, Seong B, Nguyen V, et al., 2016, 3D printing of high-resolution PLA-based structures by hybrid electrohydrodynamic and fused deposition modeling techniques. J Micromech Microeng, 26(2):025015. https://doi.org/10.1088/0960-1317/26/2/025015
He J, Xu F, Cao Y, et al., 2016, Towards microscale electrohydrodynamic three-dimensional printing. J Phys D Appl Phys, 49(5):055504. https://doi.org/10.1088/0022-3727/49/5/055504
Jing L, Sun J, Liu H, et al., 2021, Using plant proteins to develop composite scaffolds for cell culture applications. Int J Bioprint, 7(1):66–77. https://doi.org/10.18063/ijb.v7i1.298
Sun J, Jing L, Fan X, et al., 2019, Electrohydrodynamic printing process monitoring by microscopic image identification. Int J Bioprint, 5(1):1–9. https://doi.org/10.18063/ijb.v5i1.164
Sun J, Jing L, Liu H, et al., 2020, Generating nanotopography on PCL microfiber surface for better cell-scaffold interactions. Proc Manuf, 48:619–624. https://doi.org/10.1016/j.promfg.2020.05.090
An J, Chua CK, Mironov V, 2021, Application of machine learning in 3D bioprinting: Focus on development of big data and digital twin. Int J Bioprint, 7(1):1–6. https://doi.org/10.18063/ijb.v7i1.342
Sun J, Hong G, Rahman M, et al., 2005, Improved performance evaluation of tool condition identification by manufacturing loss consideration. Int J Prod Res, 43(6):1185–1204. https://doi.org/10.1080/00207540412331299701
Sun J, Yao K, Huang K, et al., 2022, Machine learning applications in scaffold based bioprinting. Mater Today Proc, 70 (2022):17–23.
Jie S, Hong GS, Rahman M, et al., 2002, Feature extraction and selection in tool condition monitoring system, in Australian Joint Conference on Artificial Intelligence, 487–497.
MathWorks, 2022, Support vector machine classification [EB/OL]. https://www.mathworks.com/help/stats/support-vector-machine-classification.html (Accessed November 8, 2022)
Yu C, Jiang J, 2020, A perspective on using machine learning in 3D bioprinting. Int J Bioprint, 6(1):4–11. https://doi.org/10.18063/ijb.v6i1.253
Shin J, Lee Y, Li Z, et al., 2022, Optimized 3D bioprinting technology based on machine learning: A review of recent trends and advances. Micromachines, 13(3):363. https://doi.org/10.3390/mi13030363
Kalantary S, Jahani A, Jahani R, 2020, MLR and Ann approaches for prediction of synthetic/natural nanofibers diameter in the environmental and medical applications. Sci Rep, 10(1):1–10. https://doi.org/10.1038/s41598-020-65121-x
Jin Z, Zhang Z, Shao X, et al., 2021, Monitoring anomalies in 3D bioprinting with deep neural networks. ACS Biomater Sci Eng. https://doi.org/10.1021/acsbiomaterials.0c01761
Conev A, Litsa EE, Perez MR, et al., 2020, Machine learning-guided three-dimensional printing of tissue engineering scaffolds. Tissue Eng Part A, 26(23-24):1359–1368. https://doi.org/10.1089/ten.tea.2020.0191
Fu Z, Angeline V, Sun W, 2021, Evaluation of printing parameters on 3D extrusion printing of pluronic hydrogels and machine learning guided parameter recommendation. Int J Bioprint, 7(4):179–189. https://doi.org/10.18063/ijb.v7i4.434
Ball AK, Das R, Roy SS, et al., 2020, Modeling of EHD inkjet printing performance using soft computing-based approaches. Soft Comput, 24(1):571–589. https://doi.org/10.1007/s00500-019-04202-0
Huang J, Segura LJ, Wang T, et al., 2020, Unsupervised learning for the droplet evolution prediction and process dynamics understanding in inkjet printing. Addit Manuf, 35:101197. https://doi.org/10.1016/j.addma.2020.101197
Ruberu K, Senadeera M, Rana S, et al., 2021, Coupling machine learning with 3D bioprinting to fast track optimisation of extrusion printing. Appl Mater Today, 22:100914. https://doi.org/10.1016/j.apmt.2020.100914
Das R, Ball AK, Roy SS, 2018, Optimization of E-jet based micro-manufacturing process using desirability function analysis, in Industry Interactive Innovations in Science, Engineering and Technology, Springer, 477–484.
Lee J, Oh SJ, An SH, et al., 2020, Machine learning-based design strategy for 3D printable bioink: Elastic modulus and yield stress determine printability. Biofabrication, 12(3):035018. https://doi.org/10.1088/1758-5090/ab8707
Bone JM, Childs CM, Menon A, et al., 2020, Hierarchical machine learning for high-fidelity 3D printed biopolymers. ACS Biomater Sci Eng, 6(12):7021–7031. https://doi.org/10.1021/acsbiomaterials.0c00755
Tian S, Stevens R, McInnes BT, et al., 2021, Machine assisted experimentation of extrusion-based bioprinting systems. Micromachines, 12(7):780. https://doi.org/10.3390/mi12070780
Tourlomousis F, Jia C, Karydis T, et al., 2019, Machine learning metrology of cell confinement in melt electrowritten three-dimensional biomaterial substrates. Microsyst Nanoeng, 5(1):1–19. https://doi.org/10.1088/1758-5090/ab8707
Yao K, Huang K, Sun J, et al., 2021, Scaffold-A549: A benchmark 3D fluorescence image dataset for unsupervised nuclei segmentation. Cognit Comput, 13(6):1603–1608. https://doi.org/10.1007/s12559-021-09944-4
Sujeeun LY, Goonoo N, Ramphul H, et al., 2020, Correlating in vitro performance with physico-chemical characteristics of nanofibrous scaffolds for skin tissue engineering using supervised machine learning algorithms. R Soc Open Sci, 7(12):201293.
Paddock SW, 1999, Confocal laser scanning microscopy. Biotechniques, 27(5):992–1004. https://doi.org/10.2144/99275ov01
Kalantary S, Jahani A, Pourbabaki R, et al., 2019, Application of ANN modeling techniques in the prediction of the diameter of PCL/gelatin nanofibers in environmental and medical studies. RSC Adv, 9(43):24858–24874. https://doi.org/10.1039/C9RA04927D
Kievit FM, Florczyk SJ, Leung MC, et al., 2010, Chitosan– alginate 3D scaffolds as a mimic of the glioma tumor microenvironment. Biomaterials, 31(22):5903–5910. https://doi.org/10.1016/j.biomaterials.2010.03.062
Lee F, Kurisawa M, 2013, Formation and stability of interpenetrating polymer network hydrogels consisting of fibrin and hyaluronic acid for tissue engineering. Acta Biomater, 9(2):5143–5152. https://doi.org/10.1016/j.actbio.2012.08.036
Fitzgerald KA, Guo J, Tierney EG, et al., 2015, The use of collagen-based scaffolds to simulate prostate cancer bone metastases with potential for evaluating delivery of nanoparticulate gene therapeutics. Biomaterials, 66:53–66. https://doi.org/10.1016/j.biomaterials.2015.07.019
Song Y, Hua S, Sayyar S, et al., 2022, Corneal bioprinting using a high concentration pure collagen I transparent bioink. Bioprinting, 28:e00235. https://doi.org/10.1016/j.bprint.2022.e00235
Reina-Romo E, Mandal S, Amorim P, et al., 2021, Towards the experimentally-informed in silico nozzle design optimization for extrusion-based bioprinting of shear-thinning hydrogels. Front Bioeng Biotechnol, 9:701778.
Xu H, Liu Q, Casillas J, et al., 2020, Prediction of cell viability in dynamic optical projection stereolithography-based bioprinting using machine learning. J Intel Manuf, 33:1–11.
Malekpour A, Chen X, 2022, Printability and cell viability in extrusion-based bioprinting from experimental, computational, and machine learning views. J Funct Biomater, 13(2):40.
Tröndle K, Miotto G, Rizzo L, et al., 2022, Deep learning-assisted nephrotoxicity testing with bioprinted renal spheroids. Int J Bioprint, 8(2):164–173.
Al-Kofahi Y, Zaltsman A, Graves R, et al., 2018, A deep learning-based algorithm for 2-D cell segmentation in microscopy images. BMC Bioinf, 19(1):1–11.
McQuin C, Goodman A, Chernyshev V, et al., 2018, CellProfiler 3.0: Next-generation image processing for biology. PLoS Biol, 16(7):e2005970.
Shohan S, Harm J, Hasan M, et al., 2021, Non-destructive quality monitoring of 3D printed tissue scaffolds via dielectric impedance spectroscopy and supervised machine learning. Proc Manuf, 53:636–643.
Chen D, Sarkar S, Candia J, et al., 2016, Machine learning based methodology to identify cell shape phenotypes associated with microenvironmental cues. Biomaterials, 104:104–118.
Yao K, Sun J, Huang K, et al., 2021, Analyzing cell-scaffold interaction through unsupervised 3D nuclei segmentation. Int J Bioprint, 8(1):167–181.
Yao K, Rochman ND, Sun SX, 2019, Cell type classification and unsupervised morphological phenotyping from low-resolution images using deep learning. Sci Rep, 9(1):1–13.
Sun J, Hong GS, Rahman M, et al., 2004, The application of nonstandard support vector machine in tool condition monitoring system, in Proceedings. DELTA 2004. Second IEEE International Workshop on Electronic Design, Test and Applications, 295–300.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 International Journal of Bioprinting
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
