Open Journal Systems





Cover Image

Of balls, inks and cages: Hybrid biofabrication of 3D tissue analogs

VIEWS - 393 (Abstract) 84 (PDF)
Nicanor Moldovan, Leni Maldovan, Michael Raghunath

Abstract


The overarching principle of three-dimensional (3D) bioprinting is the placing of cells or cell clusters in the 3D space to generate a cohesive tissue microarchitecture that comes close to in vivo characteristics. To achieve this goal, several technical solutions are available, generating considerable combinatorial bandwidth: (i) Support structures are generated first, and cells are seeded subsequently; (ii) alternatively, cells are delivered in a printing medium, so-called “bioink,” that contains them during the printing process and ensures shape fidelity of the generated structure; and (iii) a “scaffold-free” version of bioprinting, where only cells are used and the extracellular matrix is produced by the cells themselves, also recently entered a phase of accelerated development and successful applications. However, the scaffold-free approaches may still benefit from secondary incorporation of scaffolding materials, thus expanding their versatility. Reversibly, the bioink-based bioprinting could also be improved by adopting some of the principles and practices of scaffold-free biofabrication. Collectively, we anticipate that combinations of these complementary methods in a “hybrid” approach, rather than their development in separate technological niches, will largely increase their efficiency and applicability in tissue engineering.

Full Text:

PDF

References


Moroni L, Boland T, Burdick J A, et al., 2017, Biofabrication:

A guide to technology and terminology. Trends Biotechnol,

(4): 384-402. https://doi.org/10.1016/j.tibtech.2017.10.015.

Atala A, Yoo, J, 2015, Essentials of 3D Biofabrication and

Translation. Amsterdam: Elsevier.

Mironov V, 2005, The second international workshop

on bioprinting, biopatterning and bioassembly.

Expert Opin Biol Ther, 5(8): 1111-1115. https://doi.

org/10.1517/14712598.5.8.1111.

Groll J, Boland T, Blunk T, et al., 2016, Biofabrication:

Reappraising the definition of an evolving field.

Biofabrication, 8(1): 13001. https://doi.org/10.1088/1758-

/aaec52.

Yu Y, Zhang Y, Ozbolat IT, 2016, Three-dimensional

bioprinting using self-assembling scalable scaffold-free

“tissue strands” as a new bioink. Sci Rep, 6: 28714. https://

doi.org/10.1038/srep28714.

Takahashi H, Okano T, 2015, Cell sheet-based tissue

engineering for organizing anisotropic tissue constructs

produced using microfabricated thermoresponsive

substrates. Adv Healthc Mater, 4(16): 2388-2407. https://doi.

org/10.1002/adhm.201500194.

Moldovan N I, Hibino N, Nakayama K, 2017, Principles

of the kenzan method for robotic cell spheroid-based threedimensional

bioprinting. Tissue Eng Part B Rev, 23(3): 237-

https://doi.org/10.1089/ten.teb.2016.0322.

Ovsianikov A, Khademhosseini A, Mironov V, 2018, The

synergy of scaffold-based and scaffold-free tissue engineering

strategies. Trends Biotechnol, 36(4): 348-357. https://doi.

org/10.1016/j.tibtech.2018.01.005.

Moldovan L, 2017, Comparison of biomaterial-dependent

and independent bioprinting methods for cardiovascular

medicine. Curr Opin Biomed Eng, 2: 124-131. https://doi.

org/10.1016/j.cobme.2017.05.009.

Zhu W, Ma X, Gou M, et al., 2016, 3D printing of functional

biomaterials for tissue engineering. Curr Opin Biotechnol,

: 103-112. https://doi.org/10.1016/j.copbio.2016.03.014.

Muylaert D E, Fledderus J O, Bouten C V, et al., 2014,

Combining tissue repair and tissue engineering; bioactivating

implantable cell-free vascular scaffolds. Heart, 100(23):

-1830. https://doi.org/10.1136/heartjnl-2014-306092.

Jeong, C.G., Atala A, 2015, 3D printing and biofabrication

for load bearing tissue engineering. Adv Exp Med Biol,

: 3-14. https://doi.org/10.1007/978-3-319-22345-2_1.

Banu A, Tatara A M, Sutradhar A, 2018, Large animal models

of an in vivo bioreactor for engineering vascularized bone.

Tissue Eng Part B, 24(4): 317-325. https://doi.org/10.1089/

ten.teb.2018.0005.

Ho S S, Murphy K C, Binder B Y, et al., 2016, Increased

survival and function of mesenchymal stem cell spheroids

entrapped in instructive alginate hydrogels. Stem Cells Transl

Med, 5(6): 773-781. https://doi.org/10.5966/sctm.2015-0211.

Skardal A, Mack D, Kapetanovic E, et al., 2012, Bioprinted

amniotic fluid-derived stem cells accelerate healing of large

skin wounds. Stem Cells Transl Med, 1(11): 792-802. https://

doi.org/10.5966/sctm.2012-0088.

Laternser S, Keller H, Leupin O, et al., 2018, A novel microplate

D bioprinting platform for the engineering of muscle and

tendon tissues. Slas Technol, 3: 2472630318776594. https://

doi.org/10.1177/2472630318776594.

Rapoport S, 2013, Electrospinning tubular scaffolds with

tissue-like mechanical properties and biomimetic surface

features. Methods Mol Biol, 1001: 153-165. https://doi.

org/10.1007/978-1-62703-363-3_13.

Udelsman B, Hibino N, Villalona G A, et al., 2011,

Development of an operator-independent method for seeding

tissue-engineered vascular grafts. Tissue Eng Part C.

Methods, 17(7): 731-736. https://doi.org/10.1089/ten.

tec.2010.0581.

Fu W J, Xu Y D, Wang Z X, et al., 2012, New ureteral scaffold

constructed with composite poly(L-lactic acid)-collagen and

urothelial cells by new centrifugal seeding system. J Biomed

Mater Res A, 100(7): 1725-1733. https://doi.org/10.1002/

jbm.a.34134.

Thomas J, Jones D, Moldovan L, et al., 2018., Labeling of

endothelial cells with magnetic microbeads by angiophagy.

Biotechnol Lett, 2018. http//:doi: 10.1007/s10529-018-2581-9.

Murphy S V, Atala A, 2014, 3D bioprinting of tissues

and organs. Nat Biotechnol, 32(8): 773-785. https://doi.

org/10.1038/nbt.2958.

Murphy S V, Skardal A, Atala A, 2013, Evaluation of

hydrogels for bio-printing applications. J Biomed Mater

Res A, 101(1): 272-284. https://doi.org/10.1002/jbm.a.34326.

Boland T, Xu T, Damon B, et al., 2006, Application of inkjet

printing to tissue engineering. Biotechnol J, 1(9): 910-917.

https://doi.org/10.1002/biot.200600081.

Pirlo R K, Dean D, Knapp D R, et al., 2006, Cell deposition

system based on laser guidance. Biotechnol J, 1(9): 1007-

https://doi.org/10.1002/biot.200600127.

Xiong R, Zhang Z, Chai W, et al., 2015, Freeform drop-ondemand

laser printing of 3D alginate and cellular constructs.

Biofabrication, 7(4): 45011. https://doi.org/10.1088/1758-

/7/4/045011.

Hospodiuk M, Dey M, Sosnoski D, et al., 2017, The

bioink: A comprehensive review on bioprintable materials.

Biotechnol Adv, 35(2): 217-239. https://doi.org/10.1016/j.

biotechadv.2016.12.006.

Pourchet L J, Thepot A, Albouy M, et al., 2017, Human skin

D bioprinting using scaffold-free approach. Adv Healthc

Mater, 6(4):345. https://doi.org/10.1002/adhm.201601101.

Kolesky D B, Homan K A, Skylar-Scott M A, et al., 2016,

Three-dimensional bioprinting of thick vascularized tissues.

Proc Natl Acad Sci U S A, 113(12): 3179-3184. https://doi.

org/10.1073/pnas.1521342113.

Lee S J, Lim G J, Lee J W, et al., 2006, In vitro evaluation of

a poly(lactide-co-glycolide)–collagen composite scaffold for

bone regeneration. Biomaterials, 27(18): 3466-3472. https://

doi.org/10.1016/j.biomaterials.2006.01.059.

Kang H W, Lee S J, Ko I K, et al., 2016, A 3D bioprinting

system to produce human-scale tissue constructs with

structural integrity. Nat Biotechnol, 34(3): 312-319. https://doi.org/10.1038/nbt.3413.

Xu T, Binder K W, Albanna M Z, et al., 2013, Hybrid printing

of mechanically and biologically improved constructs for

cartilage tissue engineering applications. Biofabrication,

(1): 15001. https://doi.org/10.1088/1758-5082/5/1/015001.

Kikuchi T, Shimizu T, Wada M, et al., 2014, Automatic

fabrication of 3-dimensional tissues using cell sheet

manipulator technique. Biomaterials, 35(8): 2428-2435.

https://doi.org/10.1016/j.biomaterials.2013.12.014.

Kim K, Utoh R, Ohashi K, et al., 2015, Fabrication of

functional 3D hepatic tissues with polarized hepatocytes by

stacking endothelial cell sheets in vitro. J Tissue Eng Regen

Med, 2015: 124-126.

Leung B M, Sefton M V, 2010, A modular approach to cardiac

tissue engineering. Tissue Eng Part A, 16(10): 3207-3218.

https://doi.org/10.1089/ten.tea.2009.0746.

Owaki T, Shimizu T, Yamato M, et al., 2014, Cell sheet

engineering for regenerative medicine: Current challenges

and strategies. Biotechnol J, 9(7): 904-914. https://doi.

org/10.1002/biot.201300432.

Gartner Z J, Bertozzi C R, 2017, Programmed assembly of

-dimensional microtissues with defined cellular connectivity.

Proc Natl Acad Sci U S A, 106(12): 4606-4610. https://doi.

org/10.1073/pnas.0900717106.

Bhang S H, Cho S W, La W G, et al., 2011, Angiogenesis

in ischemic tissue produced by spheroid grafting of human

adipose-derived stromal cells. Biomaterials, 32(11): 2734-

https://doi.org/10.1016/j.biomaterials.2010.12.035.

Haji-Karim M, Carlsson J, 1978, Proliferation and viability

in cellular spheroids of human origin. Cancer Res,

(5): 1457-1464.

Takebe T, Enomura M, Yoshizawa E, et al., 2015,

Vascularized and complex organ buds from diverse tissues

via mesenchymal cell-driven condensation. Cell Stem Cell,

(5): 556-565. https://doi.org/10.1016/j.stem.2015.03.004.

Shafiee A, 2015, Post-deposition bioink self-assembly:

A quantitative study. Biofabrication, 7(4): 45005. https://doi.

org/10.1088/1758-5090/7/4/045005.

Mironov V, Visconti R P, Kasyanov V, et al., 2009,

Organ printing: Tissue spheroids as building blocks.

Biomaterials, 30(12): 2164-2174. https://doi.org/10.1016/j.

biomaterials.2008.12.084.

Bao B, Jiang J, Yanase T, et al., 2011, Connexon-mediated

cell adhesion drives microtissue self-assembly. FASEB J,

(1): 255-264. https://doi.org/10.1096/fj.10-155291.

Dean D M, Morgan J R, 2008, Cytoskeletal-mediated tension

modulates the directed self-assembly of microtissues. Tissue

Eng Part A, 14(12): 1989-1997. https://doi.org/10.1089/ten.

tea.2007.0320.

Thomas G L, Nagy-Mehez V, Mombach A, 2014, Dynamics of

cell aggregates fusion: Experiments and simulations. Physica,

: 247-254. https://doi.org/10.1016/j.physa.2013.10.037.

Izaguirre J A, Chaturvedi R, Huang C, et al., 2004, Compucell,

a multi-model framework for simulation of morphogenesis.

Bioinformatics, 20(7): 1129-1137. https://doi.org/10.1093/

bioinformatics/bth050.

Sego T J, Kasacheuski U, Hauersperger D, et al., 2017, A

heuristic computational model of basic cellular processes

and oxygenation during spheroid-dependent biofabrication.

Biofabrication, 9(2): 24104. https://doi.org/10.1088/1758-

/aa6ed4.

Gobaa S, Hoehnel S, Roccio M, et al., 2011, Artificial

niche microarrays for probing single stem cell fate in high

throughput. Nat Methods, 8(11): 949-955. https://doi.

org/10.1038/nmeth.1732.

Ungrin M D, Joshi C, Nica A, et al., 2008, Reproducible, ultra

high-throughput formation of multicellular organization from

single cell suspension-derived human embryonic stem cell

aggregates. PLoS One, 3(2): e1565. https://doi.org/10.1371/

journal.pone.0001565.

Murata D, Tokunaga S, Tamura T, et al., 2015, A preliminary

study of osteochondral regeneration using a scaffold-free

three-dimensional construct of porcine adipose tissue-derived

mesenchymal stem cells. J Orthop Surg Res, 10: 35. https://

doi.org/10.1186/s13018-015-0173-0.

Noguchi R, Nakayama K, Itoh M, et al., 2016 Development

of a three-dimensional pre-vascularized scaffold-free

contractile cardiac patch for treating heart disease. J Heart

Lung Transplant, 35(1): 137-145. https://doi.org/10.1016/j.

healun.2015.06.001.

Tseng H, Gage J A, Shen T, et al., 2016, A high-throughput

in vitro ring assay for vasoactivity using magnetic 3D

bioprinting. Sci Rep, 6: 30640.

Jaganathan H, Gage J, Leonard F, et al., 2014, Threedimensional

in vitro co-culture model of breast tumor using

magnetic levitation. Sci Rep, 4: 6468.

Dean D M, Sasagawa T, Shimizu T, et al., 2007, Rods, tori,

and honeycombs: The directed self-assembly of microtissues

with prescribed microscale geometries. FASEB J, 21(14):

-4012. https://doi.org/10.1096/fj.07-8710com.

Bulanova E A, Koudan E V, Degosserie J, et al., 2017,

Bioprinting of a functional vascularized mouse thyroid

gland construct. Biofabrication, 9(3): 34105. https://doi.

org/10.1088/1758-5090/aa7fdd.

Jakab K, Damon B, Neagu A, et al., 2006, Threedimensional

tissue constructs built by bioprinting.

Biorheology, 43(3-4): 509-513.

Lee W, 2012, Cellular hydrogel biopaper for patterned 3D cell

culture and modular tissue reconstruction. Adv Healthc Mater,

(5): 635-639. https://doi.org/10.1002/adhm.201290023.

Hakam M S, Imani R, Abolfathi N, et al., 2016, Evaluation

of fibrin-gelatin hydrogel as biopaper for application in skin

bioprinting: An in-vitro study. Biomed Mater Eng, 27(6):

-682. https://doi.org/10.3233/BME-161617.

Olsen T R, Mattix B, Casco M, et al., 2015, Manipulation

of cellular spheroid composition and the effects on vascular

tissue fusion. Acta Biomater, 13: 188-198. https://doi.

org/10.1016/j.actbio.2014.11.024.

Nguyen D G, Funk J, Robbins J B, et al., 2016, Bioprinted 3D

primary liver tissues allow assessment of organ-level response

to clinical drug induced toxicity in vitro. PLoS One, 11(7):

e0158674. https://doi.org/10.1371/journal.pone.0158674.

Shimoto T, 2012, Building of HD MACs using cell processing

robot for cartilage regeneration. J Robot Mechatr, 24(2): 347-

https://doi.org/10.20965/jrm.2012.p0347.

Itoh M, Nakayama K, Noguchi R, et al., 2015, Scaffoldfree

tubular tissues created by a bio-3D printer undergo

remodeling and endothelialization when implanted in rat

aortae. PLoS One, 10(9): e0136681. https://doi.org/10.1371/

journal.pone.0136681.

Machino R, Taniguchi D, Takeoka Y, et al., 2015, Scaffoldfree

trachea tissue engineering using bioprinting. Am J Respir

Crit Care Med, 191: A5343.

Zhang X Y, Yanagi Y, Takeoka Y, et al., 2018, Regeneration of

diaphragm with bio-3D cellular patch. Biomaterials, 167: 1-14.

https://doi.org/10.1016/j.biomaterials.2018.03.055.

Mironov V, Kasyanov V, Drake C, et al., 2008, Organ

printing: Promises and challenges. Regen Med, 3(1): 93-103.

https://doi.org/10.2217/17460751.3.1.93.

Collin de H A, Takeishi K, Guzman-Lepe J, et al., 2016,

Liver-regenerative transplantation: Regrow and reset. Am

J Transplant, 16(6): 1688-1696. https://doi.org/10.1111/

ajt.13678.

Yipeng J, Yongde X, Yuanyi W, et al., 2017, Microtissues

enhance smooth muscle differentiation and cell viability of

hADSCs for three dimensional bioprinting. Front Physiol,

: 534. https://doi.org/10.3389/fphys.2017.00534.

Williams S K, Touroo J S, Church K H, et al., 2013,

Encapsulation of adipose stromal vascular fraction cells

in alginate hydrogel spheroids using a direct-write threedimensional

printing system. Biores Open Access, 2(6): 448-

https://doi.org/10.1089/biores.2013.0046.

Gettler B C, Zakhari J S, Gandhi P S, et al., 2017, Formation

of adipose stromal vascular fraction cell-laden spheroids

using a three-dimensional bioprinter and superhydrophobic

surfaces. Tissue Eng Part C., 23(9): 516-524. https://doi.

org/10.1089/ten.tec.2017.0056.

Izadifar Z, Chang T, Kulyk W, et al., 2016, Analyzing biological

performance of 3D-printed, cell-impregnated hybrid constructs

for cartilage tissue engineering. Tissue Eng Part C. Methods,

(3): 173-188. https://doi.org/10.1089/ten.tec.2015.0307.

Castilho M, Feyen D, Flandes-Iparraguirre M, et al. 2017, Melt

electrospinning writing of poly-hydroxymethylglycolideco-

epsilon-caprolactone-based scaffolds for cardiac tissue

engineering. Adv Healthc Mater, 2017: 6-18.

Danilevicius P, Rezende R A, Pereira F D, et al., 2015,

Burr-like, laser-made 3D microscaffolds for tissue spheroid

encagement. Biointerphases, 10(2): 21011. https://doi.

org/10.1116/1.4922646.

Ahmad T, Lee J, Shin Y M, et al., 2017, Hybrid-spheroids

incorporating ECM like engineered fragmented fibers

potentiate stem cell function by improved cell/cell and cell/

ECM interactions. Acta Biomater, 64: 161-175. https://doi.

org/10.1016/j.actbio.2017.10.022.

Lareu R R, Arsianti I, Subramhanya H K, et al., 2007, In vitro

enhancement of collagen matrix formation and crosslinking

for applications in tissue engineering: A preliminary

study. Tissue Eng, 13(2): 385-391. https://doi.org/10.1089/

ten.2006.0224.

Satyam A, Kumar P, Fan X, et al., 2014 Macromolecular

crowding meets tissue engineering by self-assembly:

A paradigm shift in regenerative medicine. Adv Mater, 26(19):

-3034. https://doi.org/10.1002/adma.201304428.

Chen C, Loe F, Blocki A, et al., 2011, Applying

macromolecular crowding to enhance extracellular matrix

deposition and its remodeling in vitro for tissue engineering

and cell-based therapies. Adv Drug Deliv Rev, 63(4-5): 277-

https://doi.org/10.1016/j.addr.2011.03.003.

Dewavrin J Y, Hamzavi N, Shim V P, et al., 2014, Tuning

the architecture of three-dimensional collagen hydrogels by

physiological macromolecular crowding. Acta Biomater, 10(10):

-4359. https://doi.org/10.1016/j.actbio.2014.06.006.

Rashid R, Lim N S, Chee S M, et al., 2014, Novel use

for polyvinylpyrrolidone as a macromolecular crowder

for enhanced extracellular matrix deposition and cell

proliferation. Tissue Eng Part C. Methods, 20(12): 994-1002.

https://doi.org/10.1089/ten.tec.2013.0733.

Magno V, Friedrichs J, Weber H M, et al., 2017 Macromolecular crowding for tailoring tissue.-derived

fibrillated matrices. Acta Biomater, 55: 109-119. https://doi.

org/10.1016/j.actbio.2017.04.018.

Leung B M, Lesher-Perez S C, Matsuoka T, et al., 2015, Media

additives to promote spheroid circularity and compactness in

hanging drop platform. Biomater Sci, 3(2): 336-344. https://

doi.org/10.1039/C4BM00319E

Ng W L, Goh M H, Yeong W Y, et al., 2018, Applying

macromolecular crowding to 3D bioprinting: Fabrication of

D hierarchical porous collagen-based hydrogel constructs.

Biomater Sci, 6(3): 562-574. https://doi.org/10.1039/

C7BM01015J




DOI: http://dx.doi.org/10.18063/ijb.v5i1.167

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Nicanor Moldovan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.